Installation Guide
Step 1: Open the packaging and take out one inner panel.
Step 2: Slide the section with the flexible rib into the track.
Step 3: Slide the section with the flexible rib to the end of the track.
Step 4: Use the Velcro on the both side of the flexible rib to attach it to the awning.
The first inner panel is now set up.
Step 5: Take out outer front panel.
Step 6: Attach the outer rear panel by velcro.
(Make sure to install it on the outside of the awning poles).
The second outer rear panel is now set up.
Step 7: Take out outer front panel.
Step 8: Attach outer front panel by velcro.
Step 9: Zip up the side connection zipper
Step 10: Stake down the awning room with the ground pegs. The installation of the entire awning room is now complete!